CAWO’s film processor is a user-friendly machine, operating at the touch of a button. Its fast warm-up and development times along with small footprints makes it ideal for a variety of applications.
The CAWOMAT 2000 IR is an X-ray film processor suitable for rapid processing. The film throughput speed of 28 cm/min. results in a film processing time (edge to edge) of 137 sec. and allows the developing of 60 X-ray films per hour. This device is ideal for accident and emergency departments, surgical and orthopaedic clinics and other specialised departments and practices with an average daily film consumption of up to 150 sheets.
Operation is as smooth as clockwork, with the CAWOMAT 2000 IR ready for use as soon as the dispensers are filled and the power is on. A special replenishment circuit guarantees perfect images even when it is used irregularly or after long standstill periods.
All stages of the developing process occur automatically, allowing you to leave the darkroom
as soon as the film has completely disappeared in the machine. A light-tight cover (available
upon request) can reduce time spent in the darkroom even further.
This table-top film processor features an infrared drying system and an advanced electronic command system. By measuring each film, the correct mix of developer, fixer and water is used before the film is dried at the selected temperature.
Operation is so simple, it’s child’s play.
|Unpacked & Empty||56 kg|
|Ready to use||88.5 kg|
|Max. film throughput||60 pcs. / hour|
|Film throughput speed||28 cm / min.|
|Processing time||137 sec.|
|Smallest film size||10 x 10 cm|
|Largest film width||36 cm|
|Noise level||55 dB (A)|
|Voltage||230 - 240 V|
|Max. power consumption||1700 W|
The equipment runs with commercial chemical products suitable for table-top machines.
All double- sided coated general X-ray films are suitable for automatic processing.
CAWO film processors comply with the requirements of the Directive 93/42/EEC concerning
CAWOMAT 2000 IR carries the CE mark.